Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mitsutake, Toru*; Akimoto, Hajime; Misawa, Takeharu; Kureta, Masatoshi*; Katsuyama, Kozo*; Nagamine, Tsuyoshi*; Matsumoto, Shinichiro*
Proceedings of 4th World Congress on Industrial Process Tomography, Vol.1, p.348 - 353, 2005/00
An inside-structure observation of a tight-lattice 7-rod bundle was made, using the high-energy X-ray computer tomography(CT) apparatus. The two-dimensional configurations of all rods were obtained at seventy-six axial height positions over the whole length of the bundle. The measured results of the rod positions showed small rod position displacements, about 0.5 millimeters at maximum, from the lattice positions. Based on these measured rod position displacement results, the flow area, equivalent hydraulic diameter, rod-rod clearance, and rod-shroud clearance were calculated. The effect of rod position displacement on critical power was estimated by a sub-channel analysis. The result showed that the rod position displacement effect has only a small effect on critical power calculations. The calculated critical power still overestimated the measured value.
Oiwa, Hiroshi; Murai, Yuichi*; Sasaki, Toshio*; Yoshikawa, Shinji; Yamamoto, Fujio*
Proceedings of 4th World Congress on Industrial Process Tomography, Vol.1, p.428 - 433, 2005/00
We carried out reflection seismic and multi-offset VSP surveys at JNC Shobasama-site to develop the investigation technique in the granite area, and evaluated the applicability of these geophysical methods. As the result of this study, we consider that a) It is possible to infer the existence of the lower angle fracture zone in the granite by eflection seismic survey and b) Multi-offset VSP supplements the result of reflection seismic survey and it is possible to infer the distribution of the fracture zone in deeper area in the granite.
Nagae, Yuji; Takaya, Shigeru
Proceedings of 4th World Congress on Industrial Process Tomography, Vol.1, p.504 - 509, 2005/00
Focusing on the cover layer materials (as the Radon Barrier Materials), which could have the effect to restrain the radon from scattering into the air and the effect of the radiation shielding, we produced the radon barrier materials with crude bentonite on an experimental basis, using the rotary type comprehensive unit for grinding and mixing, through which we carried out the evaluation of the characteristics thereof.